ZyXEL Communications G-3000H User Manual
G-3000H User’s Guide
220
Chapter 24 System Maintenance and Information
Figure 151 Menu 24 System Maintenance
Figure 152 Valid CI Commands
24.1.1 CNM
Vantage CNM (Centralized Network Management) is a browser-based, global management
solution that allows an administrator to easily configure, manage, monitor and troubleshoot
ZyXEL devices located worldwide. See the Vantage CNM User’s Guide for details.
solution that allows an administrator to easily configure, manage, monitor and troubleshoot
ZyXEL devices located worldwide. See the Vantage CNM User’s Guide for details.
If you allow your ZyXEL device to be managed by Vantage CNM, then you should not
configure it without notifying the Vantage CNM administrator.
configure it without notifying the Vantage CNM administrator.
24.1.2 Configuring Vantage CNM
Vantage CNM is disabled on the device by default. You can configure Vantage CNM on your
ZyXEL device by using the following commands.
ZyXEL device by using the following commands.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
11. Remote Management Setup
Enter Menu Selection Number:
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
G-3000H> ?
Valid commands are:
sys exit ether wlan
ip bridge certificates 8021x
wcfg
G-3000H>
G-3000H> ?
Valid commands are:
sys exit ether wlan
ip bridge certificates 8021x
wcfg
G-3000H>