ZyXEL Communications G-3000H User Manual

G-3000H User’s Guide

Chapter 24 System Maintenance and Information

223

This is an example allowing Vantage CNM server (on the same subnet as your ZyXEL device) 
with an IP address of 10.1.1.1, to manage your device. The device and Vantage CNM 
communicate using DES encryption and a password of “12345678”.

encrymode

<0:NONE 
1:DES 
2:3DES>

This command is used to encrypt communications 

between the ZyXEL device and the Vantage CNM server.
Use this command to set the encryption mode. 
Type 0 to have no encryption, type 1 to have the ZyXEL 

device use DES encryption or type 2 to have the ZyXEL 

device use 3DES encryption. 
The ZyXEL device must use the same encryption mode 

as the Vantage CNM server. 

keepalive

0

[seconds]

Keepalive messages are sent to the Vantage CNM server 

by the ZyXEL device. They show the connection status 

between the ZyXEL device and the Vantage CNM server. 

This command displays the time interval in seconds 

between the keepalive messages that the ZyXEL device 

sends to the Vantage CNM server.
Use this command to disable keepalive message 

sending.
To set a time interval type the cnm keepalive command 

followed by a number from 10 to 655.

version

This displays the Vantage CNM version.

Table 79   CNM Commands