ZyXEL Communications G-3000H User Manual
G-3000H User’s Guide
228
Chapter 24 System Maintenance and Information
Figure 157 Menu 24.11 Remote Management Control
The following table describes the fields in this menu.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = ALL
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = ALL
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443 Access = ALL
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = ALL
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = ALL
Secure Client IP = 0.0.0.0
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = ALL
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443 Access = ALL
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = ALL
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = ALL
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 82 Menu 24.11 Remote Management Control
FIELD
DESCRIPTION
TELNET Server:
FTP Server:
HTTPS Server:
HTTP Server:
SNMP Service:
FTP Server:
HTTPS Server:
HTTP Server:
SNMP Service:
Each of these read-only labels denotes a server or service that you may use to
remotely manage the ZyAIR.
See
See
” for information on HTTPS.
Port
This field shows the port number for the remote management service. You may
change the port number for a service if needed, but you must use the same
port number to use that service for remote management.
Access
Select the access interface (if any) by pressing the [SPACE BAR]. Choices are:
LAN only, WAN only, All or Disable. The default is LAN only.
Secured Client IP
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyAIR. Enter an IP address to restrict access to a client with a matching IP
address.
Certificate
This field displays the name used to identify this certificate. The ZyAIR has an
auto_generated_self_signed_cert by factory default. The factory default
certificate is common to all ZyAIR’s that use certificates. You can replace the
certificate when you log into the ZyAIR, see the section Introducing the Web
Configurator or you can go to the Certificates configuration screen, see the
Certificates chapter.
Authenticate Client
Certificates
Select Yes by pressing the [SPACE BAR]. The internal RADIUS server uses
one of the certificates listed in the My Certificates screen to authenticate each
wireless client. The exact certificate used, depends on the certificate
information configured on the wireless client.
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.