ZyXEL Communications G-3000H User Manual
G-3000H User’s Guide
Chapter 5 Wireless Configuration
67
In the example below, when both ZyAIRs are in Bridge/Repeater mode, they form a WDS
(Wireless Distribution System) allowing the computers in LAN 1 to connect to the computers
in LAN 2.
(Wireless Distribution System) allowing the computers in LAN 1 to connect to the computers
in LAN 2.
Figure 22 Bridging Example
Be careful to avoid bridge loops when you enable bridging in the ZyAIR. Bridge loops cause
broadcast traffic to circle the network endlessly, resulting in possible throughput degradation
and disruption of communications. The following examples show two network topologies that
can lead to this problem:
broadcast traffic to circle the network endlessly, resulting in possible throughput degradation
and disruption of communications. The following examples show two network topologies that
can lead to this problem:
If two or more ZyAIRs (in bridge mode) are connected to the same hub as shown next.