ZyXEL Communications G-3000H User Manual

G-3000H User’s Guide

Chapter 7 Multiple ESS, SSID and VLAN

99

Figure 42   Configuring SSID

The following table describes the labels in this screen.

Table 30   Configuring SSID

Name

Type a name to identify this SSID profile on the ZyAIR.

SSID

Type a name to identify this wireless profile on the network. When a wireless 

client scans for an AP to associate, this is the identity that is broadcast and 

viewed in the wireless client utility.

VLAN

Enter a number from 1 to 4094. Incoming traffic from the WAN is tagged with 

this ID before it is sent to the LAN interface. Different SSID profiles can use the 

same or different VLAN IDs. This allows you to split wireless stations into 

groups using similar VLAN IDs.

Second Rx VLAN

Enter a number from 1 to 4094, but different to the VLAN ID entered.
Traffic received from the LAN interface is tagged with a Second Rx VLAN and 

forwarded to this SSID profile on the wireless LAN interface. 

Security

Select a security profile. See

 for more 

information.

RADIUS

Select a RADIUS profile from the drop-down list box, if you have a RADIUS 

server configured. If you do not need to use RADIUS authentication, ignore 

this field.

QoS

With Multi-ESS, the ZyAIR ignores the ToS in the packet headers and uses a 

single QoS priority level for all of an ESS’s traffic. 
Select the Quality of Service priority for this ESS’s traffic. See 

 for more information on the priority levels.

L2 Isolation

Select Enable from the drop down list box to activate layer-2 isolation.

Enable MAC Filtering

Select Enable from the drop down list box to activate MAC address filtering.

Apply

Click Apply to save your changes back to the ZyAIR.

Reset

Click Reset to begin configuring this screen afresh.