ZyXEL Communications NWA-3163 & NWA-3166 User Manual
Chapter 20 VLAN
NWA-3160 Series User’s Guide
255
On an Ethernet switch, create a VLAN that has the same management VLAN ID as
the NWA. The following figure has the NWA connected to port 2 and your
computer connected to port 1. The management VLAN ID is 10.
the NWA. The following figure has the NWA connected to port 2 and your
computer connected to port 1. The management VLAN ID is 10.
Figure 141 Management VLAN Configuration Example
Perform the following steps in the switch web configurator:
1
Click VLAN under Advanced Application.
2
Click Static VLAN.
3
Select the ACTIVE check box.
4
Type a Name for the VLAN ID.
5
Type a VLAN Group ID. This should be the same as the management VLAN ID on
the NWA.
the NWA.
6
Enable Transmitted Packets (Tx) Tagging on the port which you want to
connect to the NWA. Disable Tx Tagging on the port you are using to connect to
your computer.
connect to the NWA. Disable Tx Tagging on the port you are using to connect to
your computer.
7
Under Control, select Fixed to set the port as a member of the VLAN.
Figure 142 VLAN-Aware Switch - Static VLAN