ZyXEL Communications NWA-3163 & NWA-3166 User Manual
Chapter 3 Tutorials
NWA-3160 Series User’s Guide
76
4
In the screen that opens, choose the radio profile for each WLAN radio and click
Apply.
Apply.
Figure 52 Tutorial: Managed AP WLAN Radio Profile
In this example, the 1st floor NWA managed AP uses radio06 for its WLAN1
Radio Profile.
Radio Profile.
3.6.7 Checking your Settings and Testing the Configuration
The NWAs should be working at this point. You can configure the settings of each
NWA unit by just opening the Web Configurator of the primary controller AP.
NWA unit by just opening the Web Configurator of the primary controller AP.
One way to test if the setup is working is to use a wireless client to check if all the
profiles you have set up in the managed APs and the controller APs are available
for wireless connection.
profiles you have set up in the managed APs and the controller APs are available
for wireless connection.
For this example, we use the G-302 v3 wireless client utility screen to check if
radio6 (SSID: Mktg Grp 6) is in the list of wireless networks available.
radio6 (SSID: Mktg Grp 6) is in the list of wireless networks available.
Figure 53 Tutorial: Checking your Setup (MGNT Mode Settings)