ZyXEL Communications NBG6503 User Manual

Chapter 13 DHCP Server

NBG6503 User’s Guide

This screen allows you to assign IP addresses on the LAN to specific individual computers based on 
their MAC addresses. You can also use this screen to configure the DNS server information that the 
Router sends to the DHCP clients.

To change your Router’s static DHCP settings, click Network > DHCP Server > Advanced. The 
following screen displays.

Figure 81   Network > DHCP Server > Advanced 

The following table describes the labels in this screen.

Pool Size

This field specifies the size, or count of the IP address pool for LAN.

Apply

Click Apply to save your changes back to the Router.

Reset

Click Reset to begin configuring this screen afresh.

Table 48   Network > DHCP Server > General  (continued)

Table 49   Network > DHCP Server > Advanced

LAN Static DHCP Table

#

This is the index number of the static IP table entry (row).

MAC Address

Type the MAC address (with colons) of a computer on your LAN.