ZyXEL Communications NBG6503 User Manual
NBG6503 User’s Guide
125
C
HAPTER
16
Static Route
16.1 Overview
This chapter shows you how to configure static routes for your Router.
Each remote node specifies only the network to which the gateway is directly connected, and the
Router has no knowledge of the networks beyond. For instance, the Router knows about network
N2 in the following figure through remote node Router 1. However, the Router is unable to route a
packet to network N3 because it doesn't know that there is a route through the same remote node
Router 1 (via gateway Router 2). The static routes are for you to tell the Router about the networks
beyond the remote nodes.
Router has no knowledge of the networks beyond. For instance, the Router knows about network
N2 in the following figure through remote node Router 1. However, the Router is unable to route a
packet to network N3 because it doesn't know that there is a route through the same remote node
Router 1 (via gateway Router 2). The static routes are for you to tell the Router about the networks
beyond the remote nodes.
Figure 88 Example of Static Routing Topology
16.2 What You Can Do
Use the IP Static Route screen (
) to view, add and delete routes.