ZyXEL Communications NBG6503 User Manual
Chapter 9 Tutorials
NBG6503 User’s Guide
78
5
Open the Status screen. Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
Information and check if the WLAN connection is up under Interface Status.
Figure 53 Tutorial: Checking Wireless Settings
9.4.1 Configure Your Notebook
Note: We use the ZyXEL M-302 wireless adapter utility screens as an example for the
wireless client. The screens may vary for different models.
1
The Router supports IEEE 802.11b, IEEE 802.11g, IEEE 802.11n and IEEE 802.11ac wireless
clients. Make sure that your notebook or computer’s wireless adapter supports one of these
standards.
clients. Make sure that your notebook or computer’s wireless adapter supports one of these
standards.
2
Wireless adapters come with software sometimes called a “utility” that you install on your
computer. See your wireless adapter’s User’s Guide for information on how to do that.
computer. See your wireless adapter’s User’s Guide for information on how to do that.
3
After you’ve installed the utility, open it. If you cannot see your utility’s icon on your screen, go to
Start > Programs and click on your utility in the list of programs that appears. The utility displays
a list of APs within range, as shown in the example screen below.
Start > Programs and click on your utility in the list of programs that appears. The utility displays
a list of APs within range, as shown in the example screen below.
4
Select SSID_Example3 and click Connect.
Figure 54 Connecting a Wireless Client to a Wireless Network t