ZyXEL Communications NBG6503 User Manual
Chapter 10 Wireless LAN
NBG6503 User’s Guide
88
The following table describes the labels in this screen.
for descriptions of the other labels in this screen.
10.4.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your Router allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
enabled at any one time.
In order to configure and enable WEP encryption, click Network > Wireless LAN 2.4G or
Wireless LAN 5G to display the General screen. Select Static WEP from the Security Mode list.
Wireless LAN 5G to display the General screen. Select Static WEP from the Security Mode list.
Figure 61 Network > Wireless LAN 2.4G/5G > General: Static WEP
Table 32 Network > Wireless LAN 2.4G/5G > General: No Security
LABEL
DESCRIPTION
Security Mode
Choose No Security from the drop-down list box.
Apply
Click Apply to save your changes back to the Router.
Cancel
Click Cancel to reload the previous configuration for this screen.