ZyXEL Communications NBG6503 User Manual

Chapter 10 Wireless LAN

NBG6503 User’s Guide

The following table describes the labels in this screen. 

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS 
status. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS 
tab.

Figure 66   Network > Wireless LAN 2.4G/5G > WPS

The following table describes the labels in this screen.

Table 37   Network > Wireless LAN 2.4G/5G > QoS

Enable WMM 
QoS

Check this to have the Router automatically give a service a priority level according to the 
ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of 
Service) gives high priority to voice and video, which makes them run more smoothly.

Apply

Click Apply to save your changes to the Router.

Cancel

Click Cancel to reload the previous configuration for this screen.

Table 38   Network > Wireless LAN 2.4G/5G > WPS

WPS Setup

Enable WPS

Select this to enable the WPS feature.

PIN Number

This displays a PIN number last time system generated. Click Generate to generate a 
new PIN number.

Status

Status

This displays Configured when the Router has connected to a wireless network using 
WPS or when Enable WPS is selected and wireless or wireless security settings have 
been changed. The current wireless and wireless security settings also appear in the 
screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless 
security changes on the Router or you click Release_Configuration to remove the 
configured wireless and wireless security settings.