ZyXEL Communications 681 User Manual
Prestige 681 SDSL Router
Installation & Setup
2-9
Table 2-4
Filename Conventions
File Type
Internal
Name
External
Name
Description
AT
Command
Configuration
File
File
Rom-0
*.rom
This is the router configuration filename
on the Prestige. Uploading the rom-0 file
replaces the entire ROM file system,
including your Prestige configurations,
system-related data (including the baud
rate and default password), the error log
and the trace log.
on the Prestige. Uploading the rom-0 file
replaces the entire ROM file system,
including your Prestige configurations,
system-related data (including the baud
rate and default password), the error log
and the trace log.
ATLC
Firmware
Ras
*.bin
This is the generic name for the ZyNOS
firmware on the Prestige.
firmware on the Prestige.
ATUR
2.9.1 Resetting the Prestige
If you have forgotten your password or for some reason cannot access the SMT menu you will need to
reinstall the configuration file. Uploading the configuration file replaces the current configuration file with
the default configuration file, you will lose all configurations that you had before and the speed of the
console port will be reset to the default of 9600bps with 8 data bit, no parity and 1 stop bit (8n1). The
password will be reset to the default of 1234, also.
reinstall the configuration file. Uploading the configuration file replaces the current configuration file with
the default configuration file, you will lose all configurations that you had before and the speed of the
console port will be reset to the default of 9600bps with 8 data bit, no parity and 1 stop bit (8n1). The
password will be reset to the default of 1234, also.
Turn off the Prestige and begin a Telnet session with the default console port settings. Turn on the Prestige
again. When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any key to
enter debug mode. You should already have downloaded the correct file from your nearest ZyXEL FTP
site. See section 11.5 Restore Configuration on page 11-11 for more information on how to transfer the
configuration file to your Prestige.
again. When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any key to
enter debug mode. You should already have downloaded the correct file from your nearest ZyXEL FTP
site. See section 11.5 Restore Configuration on page 11-11 for more information on how to transfer the
configuration file to your Prestige.
2.10 General Setup
Menu 1 - General Setup
contains administrative and system-related information.
To enter Menu 1 and fill in the required information, follow these steps:
Step 1.
Enter 1 in the Main Menu to open Menu 1 – General Setup.
Step 2.
The Menu 1 - General Setup screen appears, as shown below. Fill in the required fields marked
[?] and turn on the individual protocols for your applications, as explained in the following table.
[?] and turn on the individual protocols for your applications, as explained in the following table.