ZyXEL Communications 681 User Manual

Prestige 681 SDSL Router

Internet Access

4-11

Table 4-5

Internet Access Setup Menu Fields

Field

Description

Options/E.G.

ISP Name

Enter the name of your Internet Service Provider,
e.g., myISP. This information is for identification
purposes only.

e.g., MyISP

Encapsulation

Press the [Spacebar] to select the method of
encapsulation used by your ISP. DLCI is N/A for
PPP encapsulation. Please see section 4.6 for
more information.

RFC 1490

PPP

CMN 1483

CMN 1490

RFC 1490

DLCI

Enter the DLCI (Data Link Connection Identifier)
that the carrier gave you. The default DLCI for the
P681 is 16, using RFC 1490 encapsulation. See
section 4.7 for more information.

e.g., 16

My Login

Enter the login name that your ISP gives you.

e.g., kitty

My Password

Enter the password associated with the login
name above.

********

Single User Account

Press the spacebar to enable or disable SUA.
Please see the following section for a more
detailed discussion on the Single User Account
feature.

Yes/No

IP Address

Enter the IP address supplied by your ISP if
applicable i.e., if you enabled SUA. See

Table 4-6

Single User Account Menu Fields

for

more information in this case.

e.g., 192.168.1.100

At this point, if all your settings are correct your Prestige should connect automatically to the Internet. If the
connection fails, note the error message that you receive on the screen and take the appropriate
troubleshooting steps.

Note: You must reboot the Prestige when you change the Encapsulation method in Menu 4 or Menu 11.