ZyXEL Communications GS-1524 User Manual
Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
111
Figure 65 SNMP User: Create
The following table describes the labels in this screen.
18.3.2 SNMP User: Modify
Click on the User ID number or select a User ID from the User ID drop down list box in the
SNMP User screen to modify the settings of an existing user.
SNMP User screen to modify the settings of an existing user.
Figure 66 SNMP User: Modify
Table 45 SNMP User: Create
LABEL
DESCRIPTION
User Name
Specify the name for this SNMP user. You can use 1-33 any printable character.
Spaces are allowed.
Group Name
Specify the SNMP group this user belongs to.
SNMP Version
Specify the SNMP version this group uses to manage the Switch.
Auth Type
Authentication can only be configured for SNMP v3.
Select None to allow this user to manage the Switch without authentication or select
Select None to allow this user to manage the Switch without authentication or select
MD5 and configure the Key field to force this user to authenticate with the Switch.
Key
Enter the MD5 key this user must use to authenticate with the Switch. You can use
1-8 printable ASCII characters. Spaces are allowed but trailing spaces are truncated.
Create
Click this to add this SNMP user to the Switch.
Cancel
Click this to go back to the main SNMP Group screen without saving your changes.