ZyXEL Communications GS-1524 User Manual
Chapter 3 Hardware Overview
GS-1524/GS-1548 User’s Guide
39
Figure 15 GS-1548 Rear Panel
3.3.1 Power Connector
Make sure you are using the correct power source as shown on the panel.
To connect the power to the Switch, insert the female end of the power cord into the power
receptacle on the rear panel. Connect the other end of the supplied power cord to a 100~240V
AC, 50/60 Hz power outlet capable of supplying at least 0.9A (G-1524) or 1.4A (GS-1548).
To connect the power to the Switch, insert the female end of the power cord into the power
receptacle on the rear panel. Connect the other end of the supplied power cord to a 100~240V
AC, 50/60 Hz power outlet capable of supplying at least 0.9A (G-1524) or 1.4A (GS-1548).
3.4 The RESET Button
Reset the Switch to its factory default configuration via the RESET button. Press the RESET
button for one second and release. The Switch automatically reboots and reloads its factory
default configuration file.
button for one second and release. The Switch automatically reboots and reloads its factory
default configuration file.
"
When you use the RESET button all of your configuration settings will be lost.
Use the default IP address (192.168.1.1) and user name (admin) and
password (1234) to log back into the Switch. It may take up to 2 minutes for
the Switch to restart when you reload the default configuration file.
Use the default IP address (192.168.1.1) and user name (admin) and
password (1234) to log back into the Switch. It may take up to 2 minutes for
the Switch to restart when you reload the default configuration file.