ZyXEL Communications GS-1524 User Manual

 Chapter 11 QoS

GS-1524/GS-1548 User’s Guide

Figure 43   IP Address Based QoS 

The following table describes the labels in this screen.  

Table 21   IP Address Based QoS 

Mode

Select IP Address Based QoS to give higher or lower priority to packets coming into the 

Switch from a specified source IP address.

Add Entry

Enter the IP address and the subnet mask of the source whose traffic you want to assign 

a priority to in the IP and MASK fields respectively. Select the Priority value and click 

Add.

Change 

Priority

Use these fields to edit existing IP address based QoS entries. Select the index of an 

existing IP address based QoS entry. (This is the same value as listed in the ID column 

of this screen.) Select the Priority you want to assign to this entry. Click Change to view 

your changed settings.

Note: The changes are not applied until you click Apply Change 

Settings. 

ID, IP, 

MASK, 

Priority, 

Delete

This is a summary table of your IP address based QoS settings. This table updates when 

you click the Change button in this screen. Click DELETE in the Delete column to 

remove this IP address based QoS entry from the Switch.

Apply 

Change 

Settings

Click this when you have reviewed the changes you want to make and you want to save 

them to the Switch’s memory.