ZyXEL Communications 650 User Manual

Prestige 650 ADSL Router 

Filter Configuration 

 

8-19 

After you have created the filter set, you must apply it. 

Step 1.  Enter 11 in the main menu to display menu 11 and type the remote node number to edit. 

Step 2.  Go to the Edit Filter Sets field, press [SPACE BAR] to choose Yes and press [ENTER]. 

Step 3.  This brings you to menu 11.5. Apply the example filter set  (for example, filter set 3) in this 

menu as shown in the next section. 

This section shows you where to apply the filter(s) after you design it (them). Sets of factory default filter 
rules have been configured in menu 21 (but have not been applied) to filter traffic. 

 

 

Menu 21.1 - Filter Rules Summary 

 

 # A Type                       Filter Rules                              M m n 

 - - ---- --------------------------------------------------------------- - - - 

 1 Y IP   Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23                             N D F 

 2 N 

 3 N 
 4 N 

 5 N 

 6 N 

 

 

                 Enter Filter Rule Number (1-6) to Configure: 1 

M = N means an action can be taken immediately. 

The action is to drop the packet (m = D) if the 

action is matched and to forward the packet 

immediately (n = F) if the action is not matched no 

matter whether there are more rules to be 

checked (there aren’t in this example). 

This shows you that you have 

configured and activated (A = Y) a 

TCP/IP filter rule (Type = IP, Pr = 6) 

for destination telnet ports (DP = 

23).