ZyXEL Communications 650 User Manual
Prestige 650 ADSL Router
Hardware Installation and Initial Setup
2-7
Figure 2-5 P650 with ADSL over ISDN
2.6 Turning On Your Prestige
At this point, you should have connected the DSL, LAN 10/100M, console and power ports to the
appropriate devices. Make sure the power adapter is plugged into an appropriate power source and the
power switch (located on the back of your Prestige) is “on” (or pressed).
appropriate devices. Make sure the power adapter is plugged into an appropriate power source and the
power switch (located on the back of your Prestige) is “on” (or pressed).
2.7 Configuring Your Prestige For Internet Access
Configure your Prestige for Internet access using:
Web Configurator (refer to the Read Me First)
SMT (System Management Terminal). Access the SMT via:
o LAN or WAN using Telnet
o Console port using terminal emulation software
The remainder of this user’s guide shows you how to configure the Prestige for Internet access using SMT
screens. There are also some sections in this guide that also focus on using Telnet to configure the Prestige.
screens. There are also some sections in this guide that also focus on using Telnet to configure the Prestige.
2.7.1 Initial Screen
When you turn on your Prestige, it performs several internal tests as well as line initialization. After the
initialization, the Prestige asks you to press [ENTER] to continue, as shown.
initialization, the Prestige asks you to press [ENTER] to continue, as shown.