ZyXEL Communications 652H/HW User Manual
Prestige 652H/HW
31
Table 10 VPN IKE
LABEL DESCRIPTION
Remote Address
Type
Type
Use the drop-down menu to choose Single, Range, or Subnet. Select Single with a
single IP address. Select Range for a specific range of IP addresses. Select Subnet to
specify IP addresses on a network by their subnet mask.
single IP address. Select Range for a specific range of IP addresses. Select Subnet to
specify IP addresses on a network by their subnet mask.
IP Address Start
When the Address Type field is configured to Single, enter a (static) IP address on the
network behind the remote IPSec router. When the Address Type field is configured to
Range, enter the beginning (static) IP address, in a range of computers on the network
behind the remote IPSec router. When the Address Type field is configured to Subnet,
enter a (static) IP address on the network behind the remote IPSec router.
network behind the remote IPSec router. When the Address Type field is configured to
Range, enter the beginning (static) IP address, in a range of computers on the network
behind the remote IPSec router. When the Address Type field is configured to Subnet,
enter a (static) IP address on the network behind the remote IPSec router.
End / Subnet Mask
When the Address Type field is configured to Single, this field is N/A. When the
Address Type field is configured to Range, enter the end (static) IP address, in a
range of computers on the network behind the remote IPSec router. When the Address
Type field is configured to Subnet, enter a subnet mask on the network behind the
remote IPSec router.
Address Type field is configured to Range, enter the end (static) IP address, in a
range of computers on the network behind the remote IPSec router. When the Address
Type field is configured to Subnet, enter a subnet mask on the network behind the
remote IPSec router.
Local ID Type
Select IP to identify this Prestige by its IP address.
Select DNS to identify this Prestige by a domain name.
Select E-mail to identify this Prestige by an e-mail address.
Select DNS to identify this Prestige by a domain name.
Select E-mail to identify this Prestige by an e-mail address.
Content When
you
select
IP in the Local ID Type field, type the IP address of your computer or
leave the field blank to have the Prestige automatically use its own IP address.
When you select DNS in the Local ID Type field, type a domain name (up to 31
characters) by which to identify this Prestige.
characters) by which to identify this Prestige.
When you select E-mail in the Local ID Type field, type an e-mail address (up to 31
characters) by which to identify this Prestige.
characters) by which to identify this Prestige.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.
identification purposes only and does not need to be a real domain name or e-mail
address.
My IP Address
Enter the WAN IP address of your Prestige. The Prestige uses its current WAN IP
address (static or dynamic) in setting up the VPN tunnel if you leave this field as
0.0.0.0.
address (static or dynamic) in setting up the VPN tunnel if you leave this field as
0.0.0.0.
The VPN tunnel has to be rebuilt if this IP address changes.
Peer ID Type
Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.