ZyXEL Communications IES1248 User Manual

 

All contents copyright (c) 2006 ZyXEL Communications Corporation.   

40

 

 

We select the Subscriber1 in IGMP Filter Profile Combobox. And click Apply to let 

the setting take effect. 

 

Go back to check the IGMP Snooping table. We will see only two channels allowed to 

be forwarded to port 1. 

 

Static Multicast Filter allow network administrator to configure multicast group 

consisting of one or more ranges of MAC multicast addresses. An administrator can 

control multicast traffic per-switch-port basis with static multicast filter. By default, 

all multicast traffic are dropped without static multicast filter setup or IGMP snooping 

which cause some routing protocol such as RIPv2 and OSPF can not be passed 

through IP DSLAM. So administrator must do any configuration of static multicast 

filter to pass such routing protocol and other related application smoothly. 

Some Well-known multicast group address: 

224.0.0.1---------all systems on this subnet