ZyXEL Communications G-1000 User Manual

G-1000 User’s Guide

106

Chapter 13 LAN Setup

Figure 59   WLAN Roaming Configuration

The following table describes the fields in this menu.

                      Menu 3.5.2 - Roaming Configuration

                    Active= Yes
                    Port #= 3517

Table 45   Menu 3.5.4 Bridge Link Configuration

Active

Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the 

G-1000 if you have two or more G-1000s on the same subnet.

Port #

Type the port number to communicate roaming information between access 

points. The port number must be the same on all access points. The default is 

3517. Make sure this port is not used by other services. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.