ZyXEL Communications G-1000 User Manual
G-1000 User’s Guide
Chapter 16 System Security
113
Figure 65 Menu 23.2 System Security: RADIUS Server
The following table describes the fields in this menu.
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= Yes
Server Address= 192.168.1.1
Port #= 1812
Shared Secret= ********
Active= Yes
Server Address= 192.168.1.1
Port #= 1812
Shared Secret= ********
Accounting Server:
Active= Yes
Server Address= 192.168.1.3
Port #= 1812
Shared Secret= ********
Active= Yes
Server Address= 192.168.1.3
Port #= 1812
Shared Secret= ********
Table 48 Menu 23.2 System Security: RADIUS Server
FIELD
DESCRIPTION
Authentication Server
Active
Press [SPACE BAR] to select Yes and press [ENTER] to enable user
authentication through an external authentication server.
Server Address
Enter the IP address of the external authentication server in dotted decimal
notation.
Port
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.
Shared Secret
Specify a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the
The key is not sent over the network. This key must be the same on the
external authentication server and G-1000.
Accounting Server
Active
Press [SPACE BAR] to select Yes and press [ENTER] to enable user
authentication through an external accounting server.
Server Address
Enter the IP address of the external accounting server in dotted decimal
notation.
Port
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.
Shared Secret
Specify a password (up to 31 alphanumeric characters) as the key to be
shared between the external accounting server and the access points.
The key is not sent over the network. This key must be the same on the
The key is not sent over the network. This key must be the same on the
external accounting server and G-1000.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.