ZyXEL Communications B-2000 User Manual

Page of 204
ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch  
NAT 
6-17 
6.5.2  Example 2: Internet Access with an Inside Server 
 
Figure 6-14 NAT Example 2 
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and then go to 
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure. 
Figure 6-15 Menu 15.2.1 - Specifying an Inside Server 
 
                          Menu 15.2 - NAT Server Setup 
 
 
               Rule   Start Port No.   End Port No.   IP Address 
              --------------------------------------------------- 
                 
1
.    
Default
         
Default
       
192.168.1.10
 
                 2.      0                0            0.0.0.0 
                 3.      0                0            0.0.0.0 
                 4.      0                0            0.0.0.0 
                 5.      0                0            0.0.0.0 
                 6.      0                0            0.0.0.0 
                 7.      0                0            0.0.0.0 
                 8.      0                0            0.0.0.0 
                 9.      0                0            0.0.0.0 
                10.      0                0            0.0.0.0 
                11.      0                0            0.0.0.0 
                12.      1027             1027         RR Reserved 
 
                    Press ENTER to Confirm or ESC to Cancel: