ZyXEL Communications B-2000 User Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch 

SNMP Configuration  

    8-3 

 

The following table describes the SNMP configuration parameters. 

SNMP:  

Get Community 

Type the Get Community, which is the password for the incoming 
Get- and GetNext requests from the management station. 

public 

Set Community 

Type the Set community, which is the password for incoming Set 
requests from the management station.  

public 

Trusted Host 

If you enter a trusted host, your ZyAIR will only respond to SNMP 
messages from this address. A blank (default) field means your 
ZyAIR will respond to all SNMP messages it receives, regardless 
of source. 

0.0.0.0 

Trap:  

Community 

 
Type the trap community, which is the password sent with each 
trap to the SNMP manager.  

public 

Destination  Type the IP address of the station to send your SNMP traps to. 

0.0.0.0 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

The ZyAIR will send traps to the SNMP manager when any one of the following events occurs: 

 

 

Menu 22 - SNMP Configuration 

 

 

SNMP: 

  Get Community= public 

  Set Community= public 

  Trusted Host= 0.0.0.0 
  Trap: 

    Community= public 

    Destination= 0.0.0.0 

                   Press ENTER to Confirm or ESC to Cancel: