ZyXEL Communications B-2000 User Manual
ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
Call Scheduling 12-3
FIELD DESCRIPTION EXAMPLE
Once:
Date
If you selected Once in the How Often field above, then enter the date
the set should activate here in year-month-date format.
the set should activate here in year-month-date format.
2000-01-01
Weekday:
Day
If you selected Weekly in the How Often field above, then select the
day(s) when the set should activate (and recur) by going to that day(s)
and pressing [SPACE BAR] to select Yes, then press [ENTER].
day(s) when the set should activate (and recur) by going to that day(s)
and pressing [SPACE BAR] to select Yes, then press [ENTER].
Yes
No
N/A
Start Time Enter the start time when you wish the schedule set to take effect in
hour-minute format.
09:00
Duration
Enter the maximum length of time this connection is allowed in hour-
minute format.
minute format.
08:00
Action
Forced On means that the connection is maintained whether or not
there is a demand call on the line and will persist for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not
there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand
call on the line. Disable Dial-On-Demand means that this schedule
prevents a demand call on the line.
there is a demand call on the line and will persist for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not
there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand
call on the line. Disable Dial-On-Demand means that this schedule
prevents a demand call on the line.
Forced On
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
save your configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPTP in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPTP in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.