ZyXEL Communications B-2000 User Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch 

2-14 

 

Hardware Installation and Initial Setup 

Fill in the required fields. Refer to the table shown next for more information about these fields. 

System Name 

Choose a descriptive name for identification purposes.  This name can 
be up to 30 alphanumeric characters long.  Spaces are not allowed, but 
dashes “-” and underscores "_" are accepted.  

ZyAIR 

Domain Name 

Enter the domain name (if you know it) here. If you leave this field blank, 
the ISP may assign a domain name via DHCP. You can go to menu 24.8 
and type "sys domainname" to see the current domain name used by 
your gateway. 

If you want to clear this field just press the [SPACE BAR]. The domain 
name entered by you is given priority over the ISP assigned domain 
name. 

zyxel.com.t

w 

Edit Dynamic DNS   Press [SPACE BAR] to select Yes and press [ENTER] to configure 

Menu 1.1 – Configure Dynamic DNS (discussed next). 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save 
your configuration, or press [ESC] at any time to cancel. 

To configure Dynamic DNS, go to Menu 1 – General Setup and select Yes in the Edit 
Dynamic DNS field. Press [ENTER] to display Menu 1.1– Configure Dynamic DNS as 
shown next.  

                    Menu 1.1 - Configure Dynamic DNS 

 

     Service Provider= WWW.DynDNS.ORG 
     Active= Yes 

     DDNSType= DynamicDNS 

     Host= 

     EMAIL= 

     USER= 

     Password= ******** 
     Enable Wildcard= No 

     Offline= N/A 

 

                    Press ENTER to Confirm or ESC to Cancel: