ZyXEL Communications B-2000 User Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch 

3-6 

Internet Access 

Follow the instructions in the following table on how to configure the DHCP fields. 

DHCP Setup 

 

 

DHCP If set to Server, your ZyAIR can assign IP addresses, an IP default 

gateway and DNS servers to Windows 95, Windows NT and other 
systems that support the DHCP client.   
If set to None, the DHCP server will be disabled.  
If set to Relay, the ZyAIR acts as a surrogate DHCP server and 
relays DHCP requests and responses between the remote server 
and the clients.  Enter the IP address of the actual, remote DHCP 
server in the Remote DHCP Server in this case. 

When DHCP is used, the following items need to be set: 

 

Server  

(default) 

 

Client IP Pool 

Starting Address 

This field specifies the first of the contiguous addresses in the IP 
address pool. 

192.168.1.33 

Size of Client IP Pool This field specifies the size or count of the IP address pool. 

32 

Primary DNS Server 

Secondary DNS 

Server 

Enter the IP addresses of the DNS servers.  The DNS servers are 
passed to the DHCP clients along with the IP address and the subnet 
mask. 

 

           Menu 3.2 - TCP/IP and DHCP Ethernet Setup 

           DHCP Setup: 

             DHCP= Server 

             Client IP Pool Starting Address= 192.168.1.33

             Size of Client IP Pool= 32 

             Primary DNS Server= 0.0.0.0 

             Secondary DNS Server= 0.0.0.0 
             Remote DHCP Server= N/A 

           TCP/IP Setup: 

             IP Address= 192.68.1.1 

             IP Subnet Mask= 255.255.255.0 

             RIP Direction= Both 

               Version= RIP-1 
             Multicast= None 

             Edit IP Alias= No 

 

 

           Press ENTER to Confirm or ESC to Cancel: 

 

Press Space Bar to Toggle. 

First address in 
the IP Pool 

Size of the IP 
Pool 

IP addresses of 
the DNS 
servers 

This is the IP 
address of the 
ZyAIR