ZyXEL Communications B-2000 User Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch  

Wireless LAN Security Setup 

4-7 

Server Address  Enter the IP address of the external authentication server in 

dotted decimal notation.  

10.11.12.13 

Port  The default port of the RADIUS server for authentication is 

1812.  

You need not change this value unless your network 
administrator instructs you to do so with additional information.   

Key  Specify a password (up to 31 alphanumeric characters) as the 

key to be shared between the external authentication server and 
the access points.  

The key is not sent over the network. This key must be the 
same on the external authentication server and ZyAIR.  

 

Accounting Server 

 

Active  Press [SPACE BAR] to select Yes and press [ENTER] to enable 

user authentication through an external accounting server.   

Server Address  Enter the IP address of the external accounting server in dotted 

decimal notation.  

10.11.12.13 

Port  The default port of the RADIUS server for accounting is 1813.  

You need not change this value unless your network 
administrator instructs you to do so with additional information.    

Key  Specify a password (up to 31 alphanumeric characters) as the 

key to be shared between the external accounting server and 
the access points.  

The key is not sent over the network. This key must be the 
same on the external accounting server and ZyAIR. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

By storing user profiles locally, your ZyAIR is able to authenticate wireless users without interacting with a 
network RADIUS server.  

Follow the steps below to set up user profiles on your ZyAIR. 
Step 1. 

From the main menu, enter 14 to display Menu 14 - Dial-in User Setup.