ZyXEL Communications B-2000 User Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch  

Remote Node Configuration 

5-3 

Outgoing: 

My Login 

 
Type the login name assigned by your ISP when the ZyAIR calls 
this remote node. 

 

My Password  Type the password assigned by your ISP when the ZyAIR calls this 

remote node. 

 

This field sets the authentication protocol used for outgoing calls. 
Options for this field are: 

PAP 

CHAP/PAP – Your ZyAIR will accept either CHAP or PAP when 
requested by this remote node. 

 

CHAP – accept CHAP (Challenge Handshake Authentication 
Protocol) only. 

Authen 

PAP – accept PAP (Password Authentication Protocol) only. 

PPTP:  

My IP Address  Type the (static) IP address assigned to you by your ISP in dotted 

decimal notation.  

10.11.12.13 

My IP Mask  Type the subnet mask of the PPTP server.  

Server IP Address   Type the IP address of the PPTP server in dotted decimal notation. 

 

Connection 

 ID/Name 

Enter the connection ID or connection name in this field. It must 
follow the "c:id" and "n:name" format. For example, C:12 or N:My 
ISP.  
This field is optional and depends on the requirements of your 
xDSL modem. 

Route 

This field determines the protocol used in routing. Options are IP 
and None. 

 

(default) 

Edit IP 

Press [SPACE BAR] to select Yes and press [ENTER] to display 
Menu 11.3 – Remote Node Network Layer Options. 

No 

Telco Option: 

Telco Option is available only for PPTP or PPPoE encapsulation.  

Allocated  

Budget (min) 

This sets a ceiling for outgoing call time for this remote node. The 
default for this field is 0 meaning no budget control.  

0 

(default)