ZyXEL Communications 645R-A Series User Manual

 

Prestige 645R-A Series User’s Guide 

Bridging Setup 

 

15-3 

Bridge (menu 11.1) 

Make sure this field is set to Yes. 

Edit IP/Bridge (menu 
11.1) 

Press [SPACE BAR] to select Yes and press [ENTER] to display menu 11.3. 

Ethernet Addr Timeout 
(min.) (menu 11.3) 

Type the time (in minutes) for the Prestige to retain the Ethernet Address 
information in its internal tables while the line is down. If this information is 
retained, your Prestige will not have to recompile the tables when the line 
comes back up. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

Similar to network layer static routes, a bridging static route tells the Prestige the route to a node before a 
connection is established. You configure bridge static routes in menu 12.3.1 (go to menu 12, choose option 
3, then choose a static route to edit) as shown next. 

The following table describes the Edit Bridge Static Route menu. 

Route # 

This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup. 

Route Name 

Type a name for the bridge static route for identification purposes. 

Menu 12.3.1 - Edit Bridge Static Route 

 

Route #: 1 

Route Name= 

Active= No 

Ether Address= ? 

IP Address= 
Gateway Node= 1 

 

 

 

 

Press ENTER to Confirm or ESC to Cancel: