ZyXEL Communications 645R-A Series User Manual

Page of 251
Prestige 645R-A Series User’s Guide 
20-4 
  Firmware and Configuration File Maintenance 
Figure 20-2 FTP Session Example 
20.2.4 GUI-based FTP Clients 
The following table describes some of the commands that you may see in GUI-based FTP clients. 
Table 20-2 General Commands for GUI-based FTP Clients  
COMMAND DESCRIPTION 
Host Address 
Enter the address of the host server. 
Login Type 
Anonymous. 
This is when a user I.D. and password is automatically supplied to the 
server for anonymous access.  Anonymous logins will work only if your 
ISP or service administrator has enabled this option. 
Normal.   
The server requires a unique User ID and Password to login. 
Transfer Type 
You must use binary mode when uploading the configuration or firmware 
file. 
Transfer files in either ASCII (plain text format) or in binary mode. 
Initial Remote Directory 
Specify the default remote directory (path). 
Initial Local Directory 
Specify the default local directory (path). 
20.2.5 TFTP and FTP over WAN Will Not Work When 
TFTP, FTP and Telnet over WAN will not work when: 
1.  You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service. 
2.  You have an SMT console session running. 
331 Enter PASS command 
Password: 
230 Logged in 
ftp> bin 
200 Type I OK 
ftp> get rom-0 zyxel.rom 
200 Port command okay 
150 Opening data connection for STOR ras 
226 File received OK 
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. 
ftp> quit