ZyXEL Communications 650HW User Manual

Prestige 650HW ADSL Router User’s Guide 

Remote Node Configuration 

 

4-5 

Incoming: 

Rem Login 

Type the login name that this remote node will use to 
call your Prestige. The login name and the Rem 
Password will be used to authenticate this node. 

 
 

Rem Password  Type the password used when this remote node calls 

your Prestige. 

 

Outgoing: 

My Login 

 
Type the login name assigned by your ISP when the 
Prestige calls this remote node. 

 

My Password  Type the password assigned by your ISP when the 

Prestige calls this remote node. 

 

This field sets the authentication protocol used for 
outgoing calls. Options for this field are: 

 

CHAP/PAP – Your Prestige will accept either CHAP or 
PAP when requested by this remote node. 

 

CHAP – accept CHAP (Challenge Handshake 
Authentication Protocol) only. 

Authen 

PAP – accept PAP (Password Authentication Protocol) 
only. 

Route 

This field determines the protocol used in routing. 
Options are IP and None. 

Bridge 

When bridging is enabled, your Prestige will forward any 
packet that it does not route to this remote node; 
otherwise, the packets are discarded. Select Yes to 
enable and No to disable. 

No 

Edit IP/Bridge 

Press [SPACE BAR] to select Yes and press [ENTER] 
to display Menu 11.3 – Remote Node Network Layer 
Options. 

No 

Edit ATM Options 

Press [SPACE BAR] to select Yes and press [ENTER] 
to display Menu 11.6 – Remote Node ATM Layer 
Options. 

No 

Telco Option 

Allocated Budget (min) 

This sets a ceiling for outgoing call time for this remote 
node. The default for this field is 0 meaning no budget 
control.  

 

Period (hr)  This field is the time period that the budget should be 

t F

l if

ll

d t

ll thi

t