ZyXEL Communications wireless n gigabit netusb router User Manual
Chapter 15 Wireless LAN
NBG4615 User’s Guide
135
15.4 MAC Filter
The MAC filter screen allows you to configure the NBG4615 to give exclusive access to devices
(Allow) or exclude devices from accessing the NBG4615 (Deny). Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC
address of the devices to configure this screen.
(Allow) or exclude devices from accessing the NBG4615 (Deny). Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC
address of the devices to configure this screen.
To change your NBG4615’s MAC filter settings, click Network > Wireless LAN > MAC Filter. The
screen appears as shown.
screen appears as shown.
Figure 84
Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 49
Network > Wireless LAN > MAC Filter
LABEL
DESCRIPTION
Access Policy
SSID
Select the SSID for which you want to configure MAC filtering.
Policy
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disable to deactivate the MAC filtering rule you configure below.
Select Allow to permit access to the NBG4615, MAC addresses not listed will be
denied access to the NBG4615.
denied access to the NBG4615.
Select Reject to block access to the NBG4615, MAC addresses not listed will be
allowed to access the NBG4615
allowed to access the NBG4615
Add a station
Mac Address
Mac Address
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG4615 in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc. Click Add.
the NBG4615 in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc. Click Add.
MAC Filter Summary
Delete
Click the delete icon to remove the MAC address from the list.
MAC Address
This is the MAC address of the wireless station that are allowed or denied access to
the NBG4615.
the NBG4615.
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to reload the previous configuration for this screen.