ZyXEL Communications wireless n gigabit netusb router User Manual

Page of 360
NBG4615 User’s Guide
233
A
P P E N D I X
      A
Product Specifications
The following tables summarize the NBG4615’s hardware and firmware features.
Table 91   
Hardware Features
Dimensions
162 mm (W) x 106 mm (D) x 28 mm (H)
Weight
285g
SDRAM
32 MB
Flash Memory
8 MB
Power Specification
Input: 100~240 AC, 50~60 Hz
Output: 12 V DC 1.5A
Ethernet ports
Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
Built-in Switch
A combination of switch and router makes your NBG4615 a cost-effective 
and viable network solution. You can add up to two computers to the 
NBG4615 without the cost of a hub when connecting to the Internet 
through the WAN port. You can add up to three computers to the NBG4615 
when you connect to the Internet in AP mode. Add more than four 
computers to your LAN by using a hub.
LEDs
Power, LAN1-4, WAN, Internet/WPS, USB1-2
Reset button
The reset button is built into the rear panel. Use this button to restore the 
NBG4615 to its factory default settings. Press for 1 second to restart the 
device. Press for 5 seconds to restore to factory default settings.
WPS button
Press the WPS on two WPS enabled devices within 120 seconds for a 
security-enabled wireless connection.
Power switch
Turn on or turn off the power of the NBG4615 using this switch.
WLAN switch
Turn on or turn off the wireless function of the NBG4615 using this switch. 
There is no need to go into the Web Configurator. 
Antenna
The NBG4615 is equipped with two 2dBi (2.4GHz) detachable antenna to 
provide clear radio transmission and reception on the wireless network. 
USB Port
The NBG4615 has two built-in USB 2.0 type A for USB device connectivity 
and supports 3G USB dongle. 
Operation Environment
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 10% ~ 90% 
Storage Environment
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 10% ~ 95%