ZyXEL Communications wireless n gigabit netusb router User Manual
Chapter 8 Easy Mode
NBG4615 User’s Guide
58
Click Status to open the following screen.
Figure 31
Easy Mode: Status Screen
8.2 What You Can Do
You can do the following in this mode:
• Use this Navigation Panel to opt out of the Easy mode (
• Use the Network Map screen to check if your NBG4615 can ping the gateway and whether it is
• Use the Control Panel to configure and enable NBG4615 features, including wireless security,
wireless scheduling and bandwidth management and so on (
• Use the Status Screen to view read-only information about the NBG4615, including the WAN IP,
MAC Address of the NBG4615 and the firmware version (
).
8.3 What You Need to Know
Between the different device modes, the Control Panel (
) changes
depending on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.
• Universal Repeater Mode: Only Power Saving and Wireless Security are available.
• WISP Mode: The available features for this mode are Game Console, Content Filter,
• Access Point Mode: Only Power Saving and Wireless Security are available.
• Universal Repeater Mode: Only Power Saving and Wireless Security are available.
• WISP Mode: The available features for this mode are Game Console, Content Filter,
Bandwidth MGMT, and Firewall.
• WISP + UR Mode: All Control Panel features are available.
Control Panel
Status Screen
Go to
Network
Map
Screen
Map
Screen
Navigation Panel