ZyXEL Communications wireless n gigabit netusb router User Manual
Chapter 10 Access Point Mode
NBG4615 User’s Guide
77
3
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “192.168.1.2” as the web address in your web browser.
type “192.168.1.2” as the web address in your web browser.
Note: After clicking Login, the Easy mode appears. Refer to
for the
Easy mode screens. Change to Expert mode to see the screens described in the
sections following this.
10.3.3 Configuring your WLAN, Bandwidth Management and Maintenance
Settings
Settings
The configuration of wireless, bandwidth management and maintenance settings in Access Point
mode is the same as for Router Mode.
mode is the same as for Router Mode.
for information on configuring your Bandwidth Management screen.
for information on configuring your Maintenance settings.