ZyXEL Communications wireless n gigabit netusb router User Manual

Chapter 11 Universal Repeater Mode

NBG4615 User’s Guide

Use the menu in the navigation panel to configure NBG4615 features in Universal Repeater 
mode.

The following screen and table show the features you can configure in Universal Repeater mode.

Menu: Universal Repeater Mode 

Refer to 

 for descriptions of the labels shown in the Navigation panel.

Use this screen to enter the SSID and select the wireless security mode used by the wireless device 
to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to 
open the Universal Repeater screen. The screen varies depending on security mode.

Configuration Mode

This shows the web configurator mode you are viewing - Expert.

Summary

Packet Statistics

Click Details... to go to the Monitor > Packet Statistics screen (

). Use this screen to view port status and packet specific statistics.

WLAN Station Status

Click Details... to go to the Monitor > WLAN Station Status screen (

). Use this screen to view the wireless stations that are currently 

associated to the NBG4615.

Interface Status

Interface

This displays the NBG4615 port types. The port types are: LAN and WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up 
or connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN 
is disabled.

Rate

For the LAN ports, this displays the port speed or N/A when the line is 
disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is 
enabled and N/A when the WLAN is disabled.

Status Screen: Universal Repeater Mode  (continued)