ZyXEL Communications wireless n gigabit netusb router User Manual
Chapter 12 WISP Mode
NBG4615 User’s Guide
98
12.5.3 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Site Survey to open the following screen.
Site Survey to open the following screen.
Figure 69
Configuration > Wireless LAN > Site Survey (WISP)
The following table describes the labels in this screen.
Table 42
Configuration > Wireless LAN > Site Survey (WISP)
LABEL
DESCRIPTION
Station Site Survey
#
Select a wireless device and click Add Profile to open a configuration screen where
you can add the selected wireless device to a profile and then enable it.
you can add the selected wireless device to a profile and then enable it.
SSID
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the NBG4615
is connecting to it.
is connecting to it.
BSSID
This displays the MAC address of the wireless device.
Signal
Strength
Strength
This displays the strength of the wireless signal. The signal strength mainly depends
on the antenna output power and the distance between your NBG4615 and this
device.
on the antenna output power and the distance between your NBG4615 and this
device.
Channel
This displays the channel number used by this wireless device.
station encryp
This displays the data encryption method used by this wireless device.
station auth
This displays the authentication method used by this wireless device.
Network Type
This displays the network type (In (Infrastructure) or Ad (Ad Hoc) of this wireless
device.
device.
Rescan
Click this button to search for available wireless devices within transmission range
and update this table.
and update this table.
Setting
Select a wireless device and click this button to add it to a profile.