ZyXEL Communications VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

217

Chapter 32 Using The SMT

The following table describes the keystrokes that you use in the SMT screens. 

Use the System Configuration menu to set general system settings such as the system name, 
the domain name or change the console port speed. 

From the Main Menu screen, type 1 and press [ENTER] to display the menu as shown.

Figure 165   SMT: System Configuration 

The following table describes the fields in this menu. 

Table 72   SMT: Control Key Descriptions

[ENTER]

To go to the selected menu.

[ESC] 

In any SMT screen. press 

[ESC]

 and enter Y (yes) to discard any changes and return to the 

main screen.

[TAB]

To move to the next configuration field.

[SPACE] 

To toggle between field choices.

                            System Configuration
  System Name               :
  Doamin Name               :
  Console Port Speed        :9600
  Web Server Port           :80
  E-Mail Server Redirect    :

Table 73   SMT: System Configuration 

System Name

Enter a descriptive name (up to 32 characters) for identification purposes.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the VSG 

may obtain a domain name from a DHCP server.
The domain name you entered is given priority over the DHCP server assigned 

domain name.

Console Port 

Speed

Enter 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, or 115200 to set the 

console port speed.
The default setting is 9600.

Note: If you change the console port speed, make sure you also 

make the same change to the terminal emulator software.