ZyXEL Communications VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

Chapter 32 Using The SMT

224

Use the System Utilities menus to upgrade firmware on the VSG or change the administrator 
login password. 

Console Port 

Speed

This field displays the console port speed.

Web Server Port

This field displays the port number for the embedded web server.
If the port number is not 80, then you need to append the port number to the WAN 

port IP address to access the VSG web configurator. For example, if 8010 is the 

web server port number, then you must enter “http://www.192.168.1.1:8010” in the 

address bar on the web browser where 192.168.1.1 is the WAN or LAN port IP 

address.

E-mail Server IP 

Address

This field displays the IP address of the e-mail server to which the VSG forwards 

the e-mail when the subscriber’s e-mail server(s) is behind a NAT-enabled network 

or firewall.

WAN 

Configuration

WAN Type? (D/S/

P/T)

This field displays the WAN IP address assignment method (Static IP Setting or 

DHCP Client).

IP Address 

This field displays the WAN IP address of the VSG.

Subnet Mask 

This field displays the subnet mask on the WAN port.

Gateway

This field displays the IP address of the default gateway.

Primary DNS 

Server

This field displays the IP address of the primary DNS server.

Secondary DNS 

Server

This field displays the IP address of the secondary DNS server.

DHCP 

Configuration

DHCP Service? 

(D/R/S)

This field displays the DHCP mode (Server, Relay or Disable) on the LAN port.

Start IP Address

This field is visible when the DHCP Service field is Server.
This field displays the first of the contiguous addresses in the IP address pool.

DHCP Pool Size

This field is visible when the DHCP Service field is Server.
This field displays the size of the DHCP client pool.

Lease Time

This field is visible when the DHCP Service field is Server.
This field displays for how many minutes a DHCP client is allowed to use an 

assigned IP address.

Agent Server IP 

Address 

This field is visible when the DHCP Service field displays Relay.
This field displays the IP address of the DHCP relay agent.

Primary/

Secondary DNS IP 

Address

These fields are visible when the DHCP Service field is Server.
These two fields display the IP address(es) of the DNS server(s).

Press any key at the “Press any to return” prompt to go back to the previous screen.

Table 78   SMT: System Status  (continued)