ZyXEL Communications VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

Appendix D Vendor Specific Attributes

244

The following table describes the VSA-related error messages. 

Table 91   VSA-related Error Messages 

VSA Error!-Traffic limit-

Time to finish is selected

The VSG is set to use the “Time to Finish” mode while the 

VSA response from the external RADIUS server include the 

Traffic-limit attribute. 

VSA Error!-Traffic limit-

Over value

The value for Traffic-limit attribute is more than the 

maximum allowed (4095). 

VSA Error!-SMTP Redirect-no 

SMTP server setup

No e-mail server configuration is set on the VSG while the 

VSA response from the external RADIUS server indicates 

SMTP redirection is activated (with an attribute value of 1). 

VSA Error!-BW-up/down-

Bandwidth Management 

=disable

Bandwidth management is not activated on the VSG while 

the VSA response from the external RADIUS server 

contains upload and download bandwidth limits. 

VSA Error!-BW-up/down-Equal 

bandwidth for all 

subscriber selected

Bandwidth management is activated on the VSG with equal 

bandwidth applied to all subscribers. 

VSA Error!-BW-up/down-Class 

of service is selected but 

no BW-up/down

Bandwidth management is activated on the VSG with class 

of service selected while no upload/download bandwidth 

information is obtained from the external RADIUS server. 

VSA Error!-BW-up/down-No 

BW-down

The external RADIUS server does not send the BW-down 

attribute value to the VSG. 

VSA Error!-BW-up/down-No 

BW-up

The external RADIUS server does not send the BW-up 

attribute value to the VSG. 

VSA Error!-BW-up/down-BW-up 

out of range

The value for BW-up attribute is invalid. 

VSA Error!-BW-up/down-BW-

down out of range

The value for BW-down attribute is invalid.