ZyXEL Communications VSG-1200 V2 User Manual
VSG-1200 V2 User’s Guide
Chapter 7 Server
72
Administrator Idle-
Timeout
Specify how many minutes (between 1 and 1440) the web configuration
can be left idle before the session times out. After it times out you have
to log in with your username and password again. Very long idle
timeouts may have security risks.
Note: This does NOT apply to the SMT management
session.
DHCP Server
Select the DHCP mode on the LAN.
Disable
Select this option to disable DHCP server on the LAN.
DHCP Relay
Select this option to set the VSG to forward network configuration
requests to a DHCP server on the LAN network. Then configure the
DHCP Server IP Address field.
DHCP Server IP Address If you select DHCP Relay, enter the IP address of the real DHCP server.
DHCP Server (Private)
Select this option to set the VSG to assign network information (such as
IP address, DNS information etc.) to Ethernet device(s) connected to the
LAN port. This is the default setting.
IP Pool Start Address
Enter the first of the continuous addresses in the IP address pool. The
default is 10.59.1.2 (based on the default management LAN IP address
of 10.59.1.1).
Pool Size
This field specifies the size or count of the IP address pool. Enter a
number not greater than 512.
Lease Time (Private)
Specify the time (in minutes between 1 and 71582788) a DHCP client is
allowed to use an assigned IP address. When the lease time expires, the
DHCP client is given a new, unused IP address.
Primary/Secondary DNS
IP Address
Enter the IP address of the DNS server(s) in the Primary DNS IP
Address and/or Secondary DNS IP Address fields.
Note: You must specify a DNS server.
DHCP Server (Public)
Select this option if you want to assign public IP address(es) to the
computer(s) connected on the LAN port. The VSG does not apply NAT
on traffic using public IP address assigned on the LAN.
Note: You must obtain more than one public IP address
from your ISP.
You need to configure a billing profile with the public service type (see
).
IP Pool Start Address
Enter the first of the continuous addresses in the public client IP address
pool.
Make sure the IP pool addresses are in the same range as the WAN IP
Make sure the IP pool addresses are in the same range as the WAN IP
address of the VSG. If they are in different IP ranges, this feature is
disabled. If you are given a range of public IP addresses, do not include
the VSG’s WAN IP address in the address pool.
Pool Size
This field specifies the size or count of the IP address pool. Enter a
number not greater than 512.
Lease Time (Public)
Specify the time (in minutes between 1 and 71582788) a DHCP client is
allowed to use an assigned IP address. When the lease time expires, the
DHCP client is given a new, unused IP address.
E-mail Server Redirect
You can set the VSG to redirect and send subscriber's E-mail via a
specified e-mail server. This feature allows subscribers to send E-mail
via the local E-mail server when their default e-mail server is not working
or prevented by relay restrictions.
Table 10 System Settings: Server (continued)
LABEL
DESCRIPTION