ZyXEL Communications 645R User Manual
Prestige 645 ADSL Internet Access Router
Hardware Installation & Setup
2-1
Chapter 2
Hardware Installation & Initial Setup
This chapter describes the physical features and cable connections of the Prestige and how to
access and use the SMT interface for configuration
.
2.1 Front Panel LEDs of the P645R
The LED indicators on the front panel indicate the operational status of the Prestige 645R. The table below
the diagram describes the LED functions:
the diagram describes the LED functions:
Figure 2-1 Prestige 645R Front Panel
Table 2-1 Front Panel LED Description
LED NAME
DESCRIPTION
PWR
The PWR (power) LED is on when power is applied to the Prestige.
SYS
A steady on SYS (system) LED indicates the Prestige is on and functioning properly
while an off SYS LED indicates the system is not ready or has a malfunction. The
SYS LED blinks when the system is rebooting.
while an off SYS LED indicates the system is not ready or has a malfunction. The
SYS LED blinks when the system is rebooting.
LAN 10M
A steady light indicates a 10Mb Ethernet connection. The LED blinks when data is
being sent/received.
being sent/received.
LAN 100M
A steady light indicates a 100Mb Ethernet connection. The LED blinks when data is
being sent/received.
being sent/received.
DSL
The ADSL LED is on when the Prestige is connected successfully to a DSLAM. The
LED blinks during ADSL line initialization. The LED is off when the link is down.
LED blinks during ADSL line initialization. The LED is off when the link is down.
ACT
The ACT LED blinks during data transfer via the ADSL line. The LED is off when no
data is being transferred on the ADSL line.
data is being transferred on the ADSL line.