ZyXEL Communications 645R User Manual
Prestige P645 ADSL Internet Access Router
IPX Configuration
6-5
6.4 LAN-to-LAN Application with Novell IPX
A typical LAN-to-LAN application is to use your Prestige 645R to call from a branch office to the
corporate headquarters to enable the stations in the branch office to access the NetWare servers at the
headquarters, as depicted in the figure below.
corporate headquarters to enable the stations in the branch office to access the NetWare servers at the
headquarters, as depicted in the figure below.
Figure 6-4 LAN-to-LAN Application with Novell IPX
6.4.1 IPX Remote Node Setup
Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 -
Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer
Options follow the instructions below.
Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer
Options follow the instructions below.
Step 1.
In menu 11.1, make sure IPX is among the protocols in the Route field. (The Route field should
display Route = IPX or Route = IP + IPX.)
display Route = IPX or Route = IP + IPX.)