ZyXEL Communications AMG1302 User Manual

 Chapter 25 Remote Management

AMG1302/AMG1202-TSeries User’s Guide

Maintenance > RemoteMGMT > WWW

The following table describes the labels in this screen.

Maintenance > RemoteMGMT > WWW

Server Port

This displays the service port number for accessing the AMG1302/AMG1202-TSeries 
using HTTP or HTTPS. If the number is grayed out, it is not editable.

Server Access

Select the interface(s) through which a computer may access the AMG1302/AMG1202-
TSeries using this service.

Note: It is recommended if you are allowing WAN access even temporarily to change the 

default password (in Maintenance > User Account). To allow access from the 
WAN, you will need to configure a WAN to Router firewall rule. See 

 for information on configuring firewall rules.

Secured Client IP 
Address

A secured client is a “trusted” computer that is allowed to communicate with the 
AMG1302/AMG1202-TSeries using this service. 

Select All to allow any computer to access the AMG1302/AMG1202-TSeries using this 
service.

Choose Range to just allow the computer(s) with an IP address in the range that you 
specify to access the AMG1302/AMG1202-TSeries using this service.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.