ZyXEL Communications AMG1302 User Manual
Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
53
5
The firewall rule you configured appears in the table. The AMG1302/AMG1202-TSeries allows traffic
from the WAN to LAN if it matches port 123.
from the WAN to LAN if it matches port 123.
4.8 Configuring Static Route for Routing to Another
Network
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the AMG1302/AMG1202-TSeries’s LAN. The router may be used to separate two department
networks. This tutorial shows how to configure a static routing rule for two network routings.
the AMG1302/AMG1202-TSeries’s LAN. The router may be used to separate two department
networks. This tutorial shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the AMG1302/AMG1202-TSeries’s LAN. R connects
to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the AMG1302/
AMG1202-TSeries’s WAN default gateway by default. In this case, B will never receive the traffic.
to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the AMG1302/
AMG1202-TSeries’s WAN default gateway by default. In this case, B will never receive the traffic.
You need to specify a static routing rule on the AMG1302/AMG1202-TSeries to specify R as the
router in charge of forwarding traffic to N2. In this case, the AMG1302/AMG1202-TSeries routes
traffic from A to R and then R routes the traffic to B.
router in charge of forwarding traffic to N2. In this case, the AMG1302/AMG1202-TSeries routes
traffic from A to R and then R routes the traffic to B.
N2
B
N1
A
R