ZyXEL Communications AMG1302 User Manual

 Chapter 7 Wireless LAN

AMG1302/AMG1202-TSeries User’s Guide

Network Setting > Wireless > General 

The following table describes the labels in this screen.

Network Setting > Wireless > General

Wireless Network Setup

Wireless

Select Enable Wireless LAN to activate wireless LAN.

Wireless Network Settings

Wireless 
Network Name 
(SSID)

The SSID (Service Set IDentity) identifies the service set with which a wireless device is 
associated. Wireless devices associating to the access point (AP) must have the same 
SSID. 

Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station cannot 
obtain the SSID through scanning using a site survey tool.

Client Isolation 

Select this to keep the wireless clients in this SSID from communicating with each other 
through the AMG1302/AMG1202-TSeries. 

MBSSID/LAN 
Isolation 

Select this to keep the wireless clients in this SSID from communicating with clients in 
other SSIDs or wired LAN devices through the AMG1302/AMG1202-TSeries.

Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID’s wireless 
clients to only connect to the Internet through the AMG1302/AMG1202-TSeries.

Channel 
Selection

Set the operating channel manually by selecting a channel from the Channel Selection 
list or use Auto to have it automatically determine a channel to use.

Operating 
Channel 

This field displays the channel the AMG1302/AMG1202-TSeries is currently using.

Security Level