ZyXEL Communications AMG1302 User Manual
Chapter 8 Home Networking
AMG1302/AMG1202-TSeries User’s Guide
127
When you use IP alias, you can also configure firewall rules to control access to the LAN's logical
network (subnet).
network (subnet).
8.5.1 Configuring the LAN IP Alias Screen
Use this screen to change your AMG1302/AMG1202-TSeries’s IP alias settings. Click Network
Setting > Home Networking > IP Alias to open the following screen.
Setting > Home Networking > IP Alias to open the following screen.
Figure 51
Network Setting > Home Networking > IP Alias
The following table describes the labels in this screen.
8.6 The IPv6 LAN Setup Screen
Use this screen to configure the IPv6 settings for your AMG1302/AMG1202-TSeries’s LAN interface.
See
See
for background information about IPv6.
Table 34
Network Setting > Home Networking > IP Alias
LABEL
DESCRIPTION
IP Alias
Select Enable to configure a LAN network for the AMG1302/AMG1202-TSeries.
IP Address
Enter the IP address of your AMG1302/AMG1202-TSeries in dotted decimal notation.
IP Subnet Mask
Your AMG1302/AMG1202-TSeries will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the AMG1302/AMG1202-TSeries.
the IP address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the AMG1302/AMG1202-TSeries.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.