ZyXEL Communications G-2000 Plus User Manual

ZyAIR G-2000 Plus User’s Guide

153 

Chapter 11 Static Route Screens

Figure 63   Static Route

The following table describes the labels in this screen.

Table 48   Static Route

#

Number of an individual static route.

Name

Name that describes or identifies this route. 

Active

This field shows whether this static route is active (Yes) or not (No).

Destination

This parameter specifies the IP network address of the final destination. Routing is 

always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is an immediate neighbor of 

your ZyAIR that will forward the packet to the destination. On the LAN, the gateway 

must be a router on the same segment as your ZyAIR; over the WAN, the gateway 

must be the IP address of one of the remote nodes.

Edit

Select a static route index number and then click Edit to set up a static route on the 

ZyAIR.

Delete

To remove a static route on the ZyAIR, click the radio button next to the static route 

index number you want to remove, then click Delete.

Select a static route index number and click Edit. The screen shown next appears. Fill in the 
required information for each static route.